Interface = wan1 Ĭreate an address definition to represent the private network protected by the Fortigate.This will be used later in a firewall policy definition to allow clients to communicate with the DHCP server via IPsec. To create a new address definition, click on the Create New button at the top of the page.Ĭreate an address definition to represent the IP address of the public interface.

Navigate to the following screen using the pane on the left hand side of the browser interface. These will be used later in other parts of the gateway configuration. Several address definitions must be created. The default gateway is configured as 1.1.1.1 via the WAN interface. The internal interface has a static private IP address of 10.1.2.22 which faces the internal private network. The wan interface has a static public IP address of 10.1.1.22 which faces the internet. For more information, please consult your Fortigate product documentation. This example assumes you have knowledge of the Fortigate web configuration interface. The client uses the DHCP over IPsec configuration method to acquire the following parameters automatically from the gateway. The configuration example described below will allow an IPsec VPN client to communicate with a single remote private network. The Shrew Soft VPN Client has been tested with Fortigate products to ensure interoperability. This guide provides information that can be used to configure a Fortigate device to support IPsec VPN client connectivity.

Alternate to fortinet vpn client